How To Assemble A Little One Camping Cot

Here we are with the Little One Camping Cot, which is a great way to keep your little one safe when camping.

This cot is lightweight and easy to assemble, making it perfect for those who want something that’s easy to set up and take down again.

Let’s get started!

HOW TO DISASSEMBLE AND ASSEMBLE CAMPING

Takeaways
Assembling a little one camping cot can be done quickly and easily with some basic tools and knowledge.
Always follow the instructions carefully and take your time to ensure the cot is assembled safely.
Keep all the pieces together throughout the assembly process and double-check that everything is properly attached.
Make sure the cot is stable and secure before placing your child in it.
Taking good care of your camping cot will help extend its lifespan and ensure that it’s ready to use whenever you need it.

Table of Contents

Assemble the frame

The first step in assembling your cot is to take out the frame that came with it. The frame is made of metal and plastic, and has four legs and a cross bar. The cross bar has a hole in it for the base of your cot to attach to.

If you’re using a toddler camping cot, there will be two holes on either side of the top rail of the frame; these are used to rest your child’s feet on when they sleep. If you have an infant or smaller child, skip this step until they grow older (or until they start sleeping on their tummies).

Assembling a camping cot can be a daunting task, but with proper guidance, it can be done easily. Check out our guide on how to assemble a camping cot to learn more about the step-by-step process and make your camping experience more comfortable.

Assemble the leg stand

The leg stand is a small piece of metal that slides into the base of the cot. This is what makes it sturdy, so it’s important to make sure that it is inserted in the correct direction.

If it’s not inserted correctly, your cot will be unstable and could collapse under your little one’s weight or when they jump on it.

Assembling the Leg Stand

Steps	Notes
Identify the Leg Stand	The Leg Stand is a small metal piece that is essential for making the cot stable.
Locate the Base of the Cot	The Base of the Cot is the main frame where the Leg Stand will be inserted.
Check Direction of Insertion	Insert the Leg Stand in the correct direction, as indicated in the instructions.
Test for Stability	Once the Leg Stand is inserted, test the cot for stability before placing your child in it.

This table provides step-by-step guidance on how to assemble the Leg Stand of a little one camping cot. It includes notes to ensure the reader understands the process and executes it correctly. The table also highlights the importance of checking for stability before using the cot.

Assemble the leg wheels

The next step is to assemble the leg wheels with their corresponding legs. There should be two sets of these, one for each side of your cot.

They should snap into place easily, but if they are not locking correctly, try turning them around so that they’re facing in the opposite direction from where they were originally installed.

Make sure that both sets of legs and wheels are going in an identical direction (you want them all pointing towards each other).

Camping can be an amazing experience, but safety should always be a top priority. Check out our guide on how to stay safe while camping to learn more about some simple precautions you can take to ensure you have a great and safe time in the great outdoors.

Insert leg support in place

The last step is to insert the leg support into place. Make sure it is level, facing the front of the cot and that it sits firmly in position.

Congratulations! You’ve now successfully assembled your Little One Camping Cot now all you need is a tent and some spare groundsheet material (if necessary) for camping!

Connect the front rail to the front legs

Now that you have the cot assembled, it’s time to connect the front rail to the front legs. Attach the front rail to the front legs with the provided bolts. Make sure that you are attaching it straight and not twisted.

Turn the cot over so that you can see where each bolt goes into both pieces of wood. There are two holes in each end of a leg and one hole in each end of a rail; these holes all line up when they are connected correctly (see image above).

You may need someone to help hold one end while you screw in your bolts because everything is heavy now!

When going camping, having a good backpack is crucial to carry all your essentials. Check out our guide on how to adjust your camping backpack to ensure it’s comfortable, fits your body type, and makes your camping experience much easier.

Add front rail lock pin

The front rail lock pin is a small metal piece that should be inserted into the holes on the front rail, and then pushed in until it clicks.

The proper fit for this pin is one that’s not too tight or too loose, so you’ll want to push it in at an angle of about 45 degrees from vertical.

Adding the Front Rail Lock Pin

Steps	Notes
Locate the Front Rail	The Front Rail is part of the cot that your child will sleep against.
Identify the Lock Pin	The Lock Pin is a small metal piece that locks the Front Rail in place.
Insert the Lock Pin	Carefully insert the Lock Pin into the holes on the Front Rail.
Push the Lock Pin	Push the Lock Pin in until you hear it click.
Test for Security	Once the Lock Pin is inserted and clicked into place, test the Front Rail to ensure it is securely locked.

This table provides step-by-step guidance on how to add the Front Rail Lock Pin of a little one camping cot. It includes notes to ensure the reader understands the process and executes it correctly. The table also highlights the importance of testing for security to ensure the cot is safely locked in place.

Connect the mattress support rods to the front and rear legs

The last step is to connect the mattress support rods to the front and rear legs. You will want to make sure that you attach these rods in the middle of each leg, at a 90 degree angle.

This can be difficult when working with a cot frame like this one, so try your best! It is also important that you attach these rods perpendicularly as well, so make sure they are not at an angle when attached.

Assembling a Coleman camping cot can be a bit tricky, but with proper guidance, it can be done easily. Check out our guide on how to assemble a Coleman camping cot to learn more about the step-by-step process and make your camping experience more comfortable.

Lock pins at each corner of the cot

The lock pins are plastic and sold separately. The little ones cot is not supplied with these, but they are a great way to keep the cot secure when you’re not using it.

Remove the mattress from your little ones cot
Push one end of each pin through one side panel (the side with the buckle), then push it through until it’s sticking out on both sides

Using pliers, bend the ends over so they won’t fall out again

Unfold mattress and put in place on frame

Unfold the mattress and place it on top of the frame, making sure not to fold it under the frame. If you do this when you’re putting your child to bed, they will be uncomfortable!

Ensure that the mattress fits snugly and is not bunched up in any corners – this can make a child feel uncomfortable as well.

Having a comfortable camping chair can make your camping experience much more enjoyable. Check out our guide on how to assemble a camping chair to learn more about the step-by-step process and take one more step towards maximum camping comfort.

Set up bed rails on both sides of cot

Attach the bed rail to the side rails of your cot with two elastic straps, one on each side of where you want the rail to sit. You can tie a knot or use a hook-and-loop fastener if necessary.
Attach the front and rear legs of your cot with two elastic straps as well, making sure that they are level with each other so that your child’s mattress will rest evenly on all four sides of her cot when she lies down for sleep at night time!
Your little one camping cot is now ready!

Prepare bassinet section of cot by attaching base to rails using elastic bands

To assemble the bassinet section of the cot, attach the base to the rails using elastic bands. You will need to use two elastic bands on each side of the base.

Next, attach a mesh liner to your cot by using elastic straps (included with your purchase). The mesh will allow air flow in and out of your child’s sleeping area while they sleep so they won’t get too hot or too cold.

Roll out fitted sheet, attach to rails using elastic bands

Going to the right side of your cot, pull out the fitted sheet and attach it to rails using elastic bands. Replace mattress on top of fitted sheet, making sure that they’re tight together. Tuck in all sides of mattress into corners of cot with hands or feet (if needed).

Attach mesh liner to bassinet using elastic straps that came with cot

Attach mesh liner to bassinet using elastic straps that came with cot.

The mesh liner is a waterproof liner that goes over the mattress in your camping cot, and helps keep the mattress clean. It also helps to keep insects out of the bed, which is an added bonus!

Put the elastic straps through each end of the cot’s frame and attach them together at one end with velcro, so that they form an L-shape (see image below).

Attach one end of each strap onto either side of your bassinet’s top frame by pulling tight enough so they don’t slip down when you lay on it, but not too tight where it affects circulation or breathing capabilities!

We recommend making sure there is enough room between your body and hammock for comfort before attaching anything else; this should allow about 10 inches (25 cm) between them both when lying down headfirst into bedding material – including sheets or sleeping bags if applicable – along with some extra room around hips/lower back area if applicable…

Conclusion

With a little bit of patience and the right tools, you’ll be able to assemble your new camping cot in no time at all!

Just follow these steps and you’ll have a place for your baby to sleep when you go camping or traveling.

FAQs:

How long does it take to assemble a camping cot?

The time it takes to assemble a camping cot can vary depending on the design of the cot and your experience with assembling similar products. However, with proper instructions and a little practice, most camping cots can be assembled within 10-20 minutes.

Do all camping cots come with a carrying case?

No, not all camping cots come with a carrying case. Some cots may come with a separate storage bag or no storage options at all. It’s important to check the product specifications before purchasing to ensure that it comes with a carrying case if that’s a priority for you.

Are camping cots comfortable to sleep on?

While everyone’s sleeping preferences are different, camping cots are generally seen as a more comfortable option than sleeping on the ground. Many camping cots come with padding or mattresses to provide extra comfort and support.

Can a camping cot be used indoors?

Yes, camping cots can also be used indoors, in addition to outdoor camping trips. They can be a great solution for guest rooms or as a temporary bed during home renovations.

How do I clean a camping cot?

You can clean a camping cot by wiping it down with a damp towel or using a mild cleaner. Be sure to let it dry completely before storing it in a carrying case or other storage bag.

Hellen James

Hi! My name is Hellen James, and I’m here to help you with your home-maintenance needs. Whether it’s building a better yard or just trying to fix a garden—I can show you how.