A camping chair is a great piece of equipment for your next outdoor adventure. When you’re planning to go hiking or just have some fun in the outdoors, you’ll want to bring along everything you need and then some.
The more prepared you are, the better off your trip will be. You can’t do without having a reliable camping chair on hand!
| Camping Chair Assembly Tips |
|---|
| Read the instructions carefully |
| Sort and organize the pieces |
| Choose a flat and stable surface |
| Follow proper order and assembly sequence |
| Tighten all screws and bolts |
| Test the chair for stability and comfort |
| Disassemble the chair after use for easy storage |
Unfold The Camping Chair
Remove the seat from the frame by pressing down on it and sliding it off the end of a metal rod, which is visible once you remove a plastic cover at one end of your camping chair’s frame.
Remove the frame from the seat by pulling out two metal arms that are connected to each other (one arm has an arrow pointing downward).
These arms are attached via a hinge, so when you pull them apart and remove them from where they’re positioned under or over an opening in your camping chair’s seat, they will hang freely from their hinges until you’ve removed all four of them from their slots in your camping chair’s base
Then they’ll come apart easily with one swift tug on each side of both arms simultaneously (this will cause them to disconnect from each other).
Fold up all remaining parts of your camp chair carefully so as not to bend any pieces too much during storage for later use when needed again during assembly tasks or everyday use outdoors around home.”
If you need to assemble a camping tent and don’t know where to start, check out our article that provides step-by-step instructions and helpful tips on how to assemble a camping tent.
Find The Parts Of The Frame And Seat
There are two main parts of a camping chair: the frame and seat. The metal part of your camping chair is called its “frame,” and it makes up most of what you see when you look at a camp chair.
The soft part that rests on top of this metal frame is called its “seat,” and it’s designed to be comfortable for sitting on.
Make sure that both your frame and seat are intact before beginning assembly; if either one has been damaged in shipping or use, contact customer support right away so they can help fix the problem for you!
Do not use interchangeable parts between different chairs for example, if you have ordered two seats but only received one complete set (including both items), do not simply swap out pieces from one unit to complete another!
Match The Right Frame To The Right Seat
This is the most important step! Before you begin, make sure that your frame and seat are compatible.
For example, if you have a larger frame but want to use a smaller seat, this won’t work. The two parts must match in size and number of holes (and screw length).
If you’re unsure whether or not they will fit together, look at the instructions that came with your chair. If they don’t explain anything about compatibility issues (or any other assembly tips), then refer to the manufacturer’s website for guidance on how best to put together their products.
Assembling a camping cot can be a bit tricky for some, but with our comprehensive guide on how to assemble a camping cot, you’ll have your cot ready in no time.
Open Up All The Screw Holes In Both Pieces
First, use a screwdriver to open up all the holes in both pieces of your chair. Be careful not to go too far into the wood you only want to loosen them, not take out any more than necessary.
Then check that both corners are aligned and that each hole matches up with its counterpart on the other piece.
Preparation Tips for Assembling a Camping Chair
| Step | Instruction |
|---|---|
| 1. | Gather all the tools and materials needed for assembly. |
| 2. | Check that all the pieces match the instructions and are not damaged or missing parts. |
| 3. | Locate and open up all the screw holes in both pieces of the chair using a screwdriver or other appropriate tool. |
| 4. | Sort and organize the pieces so they are easily accessible. |
| 5. | Select a flat and stable surface for assembly. |
| 6. | Follow the proper order and assembly sequence according to the instructions. |
| 7. | Tighten all screws and bolts, but avoid over-tightening as it may damage the chair. |
| 8. | Test the chair for stability and comfort before use. |
| 9. | Disassemble the chair after use for easy storage. |
Push The Frame Into The Holes
Now it’s time to attach the frame. First, make sure each hole is aligned with its corresponding tab on the frame by lining up both ends of the fabric with their respective tabs.
Then, push one end of that side’s fabric under its tab and into a hole at the top of your chair’s backrest.
Push down until it clicks into place so that both ends are secure in their sockets. Repeat this process for all four corners of your chair’s backrest before moving on to attaching its seat bottom (if applicable).
Next, check for wobble or loose screws if you spot either issue, tighten as necessary using an Allen wrench (included with purchase) or similar tool if yours didn’t come with one provided by manufacturer.
Camping trips are always fun, but safety should always be a top priority. To learn more about how to stay safe while camping, read our article on how to stay safe while camping which provides practical tips to keep you and your family safe on your next camping trip.
Match Up The Holes In All Four Sections Of Each Side
If you are using a camping chair that includes an attached table, be sure to match up the holes in all four sections of each side.
If you are using a camping chair that does not include an attached table, skip this step and proceed directly to Step 8.
Make sure all screws are tight and check for wobble. If necessary, tighten any loose screws before continuing with assembly.
Flip Over To Check Alignment
Flip your chair over and check for wobble. If there is any, tighten the screws on that part of the frame.
If a screw seems loose, you may be able to loosen it slightly and retighten it without losing its original structure (but if you’re not sure what you’re doing, don’t take a chance).
Packing a hiking or camping backpack can be a challenge, but don’t worry, we’ve got you covered! Check out our article on how to adjust a camping backpack to learn more about fitting your backpack correctly.
Get A Phillips Screwdriver
You’ll need a Phillips head screwdriver for this job. You can buy them at any hardware or home improvement store and they’re easy to find, so no big deal if you don’t have one lying around your house.
The size of the screwdriver will depend on what size screws you’re using, so it’s important that you get one that fits both the screw head and the screw size.
For example: if I were using 2″ screws for my chair frame, I would need an 8″ long Phillips head screwdriver with 2″ slots on either side of the blade (so two sets).
Put Two Screws In Each Corner To Assemble Camping Chair
The next step is to put two screws in each corner of the frame. To do this, you will need a small screwdriver and some patience.
The holes for these screws are on the outside of the frame and on the inside of the seat cover. They’re very small so be careful not to lose them!
Steps to Assemble a Camping Chair
| Step | Instruction |
|---|---|
| 1. | Gather all the required tools and materials for assembly. |
| 2. | Check that all the parts match the instructions and are not damaged or missing anything. |
| 3. | Locate the screw holes in both pieces of the chair. |
| 4. | Insert two screws in each corner of the chair and hand tighten them initially. |
| 5. | Check that you have attached all screws to the appropriate places before tightening them fully. |
| 6. | Use a screwdriver or other appropriate tool to tighten the screws fully but do not over-tighten them. |
| 7. | Repeat the process for each corner of the chair until all screws are securely in place. |
| 8. | Attach any remaining parts following the instructions carefully. |
| 9. | Inspect the chair for any loose screws or pieces before use. |
| 10. | Test the chair for stability and comfort before use to ensure that all parts are securely attached. |
Check For Wobble And Tighten Loose Screws If Necessary
To check for any wobbly parts, try shaking the chair back and forth. If you don’t feel any movement or hear a clunking sound, then your chair is probably good to go!
But if you do notice some slight movement (and it feels like one side of the frame has more give than another), that could mean that a screw has come loose somewhere along the way.
The best way to fix this is by using a screwdriver to tighten those screws down again until they fit snugly in place but be careful not to overdo it!
Too much force applied with too big of a wrench can cause damage if done too vigorously.
It might seem daunting at first glance when looking at all those screws on your brand new camping chair, but rest assured: there are plenty of tools available specifically designed for helping out with this task!
Most hardware stores sell screwdrivers specifically designed for use around furniture and home improvement projects; these will usually come equipped with multiple bits so you can choose between Phillips head or flat head styles depending on what type(s) of screw heads need tightening up first before moving onto others later down line once everything has been secured properly again (or vice versa).
If you’re thinking about asking somebody to go camping with you, it can be a bit daunting. To make sure that the proposal goes as smoothly as possible, read our article on how to ask a girl to go camping for some expert advice.
Turn Upright, Look For Wobble — Tighten If Necessary
Now that you’ve got the chair upright, take a look at it and make sure it’s not wobbly. If it is, try tightening the screws on the chair legs until it stops wobbling.
Once you’ve done that, check for stability. Push down on each leg—if they’re sturdy and not bending, you’re good to go!
Conclusion
You’ve now learned how to assemble a camping chair. It can be a little tricky at first if you’re not used to doing this sort of thing, but don’t worry! After going through these steps once or twice, you’ll feel like an expert in no time.
If you still have questions about how it works or want more details on specific parts of the process, please let us know in the comments below. We hope this guide was helpful! Happy building!
Further Reading
Looking for tips on how to set up a trailhead camp chair? Check out this guide from Yeti: Set up the Trailhead Camp Chair – Yeti.
CleverHiker provides an extensive list and reviews of camping chairs available in the market, check out this guide on The Best Camping Chairs of 2021.
If you still can’t find the right camping chair for you, OutdoorGearLab reviews and compares the best camping chairs in the market today. Check out their guide on Best Camping Chair of 2021.
FAQs
What are the essential factors to consider before purchasing a camping chair?
When purchasing a camping chair, consider the chair’s weight capacity, material, portability, durability, and comfort.
How do you take care of your camping chair to extend its lifespan?
To extend the lifespan of your chair, avoid sitting on it in direct sunlight or in extreme temperatures, and clean it regularly. Store the chair in a dry place and do not overload it beyond its weight capacity.
How to clean a camping chair?
Cleaning a camping chair depends on the material of the chair. In general, you can wipe it down with a damp cloth, mild soap, and warm water. Be sure to dry the chair completely before packing it away.
Should I choose a camping chair with or without armrests?
It depends on your personal preference. Armrests provide additional comfort and support, especially for larger individuals. However, they can also make the chair less portable.
Can I use a camping chair for other outdoor activities like fishing or tailgating?
Yes, most camping chairs are versatile and can be used for various outdoor activities. However, certain features such as lightweight and portability may be more important for some activities than others.
Hi! My name is Hellen James, and I’m here to help you with your home-maintenance needs. Whether it’s building a better yard or just trying to fix a garden—I can show you how.
