How To Apply Artificial Grass On Wall (Easy Fix)

When you’re ready to add artificial grass to your wall, there are a few things you should do first. First, make sure that your wall is clean and dry. Then, measure the height of your wall so that you know exactly how much material to buy. 

Also, measure the width of the area that will be covered with grass this will help ensure that you have enough material for an even application. 

It’s also helpful if you have a leveler handy when making sure your surface is level before applying glue or adhesive.

How to install grass on wall | Artificial grass

Sure! Here’s a single-column takeaway table based on the title:

Clean your artificial grass regularly to maintain its appearance and prevent damage.
Add sand to the surface of your artificial grass to keep it from flattening over time.
Follow a step-by-step guide to make the installation process more manageable.
Attaching artificial grass to a wall is possible with the right knowledge and tools.
Anchor your artificial grass to the soil beneath it to ensure that it stays in place.

Prepare Surface

When applying artificial grass to a wall, you must ensure the surface is clean and dry. Make sure you have removed any traces of dirt or dust that may have accumulated on your wall over time. 

You should also make sure that no moisture remains on the surface; if it does, this can cause mold to grow in artificial grass which will be difficult to remove later on.

If your wall has multiple colors or textures (i.e., stucco), it may require priming before installing synthetic turf so that these features are not exposed through gaps between blades of grass when they are installed.

When applying artificial grass, it’s important to clean it regularly to maintain its appearance and prevent damage. Consider using an artificial grass cleaner to help with this task. Check out our simple guide on how to apply artificial grass cleaner for some useful tips.

Cut Out The Grass

Cut out the grass in a shape that will fit on the wall. The grass will be a little too long, so cut it down to size. Don’t cut it too short or you won’t be able to glue it on.

Cut Out The Grass Table

Measure the size of the wall to determine how big of a piece of artificial grass is needed.
Cut out the grass in the desired shape that will fit on the wall.
Use a sharp utility knife or scissors to trim the grass down to the appropriate size for the wall.
Be careful not to cut the grass too short or it may be difficult to glue or attach to the wall.

Glue The Grass To The Wall

Glue the grass to the wall by first applying glue to the back of each piece of grass. Next, apply a thin layer of glue over the entire surface of your wall. 

Using a roller, roll up and down over your wall in order to distribute the glue evenly across its surface. 

Once you’ve added enough glue, allow it to dry for 24 hours before walking on or sitting on it so that it can form a strong bond with your wall surface.

A common issue with artificial grass is that it can become flattened over time, impacting its look and feel. One solution to this problem is to add sand to the surface of the grass to help it stand up. Learn more about how to add sand to artificial grass with our helpful guide on easy ways to add sand to artificial grass.

Apply Adhesive To One Section At A Time

You will want to apply the artificial grass adhesive in sections. This means that you should not be slathering on glue all over your wall at once. 

The amount of glue needed will vary depending on how long your wall is and where it is, but for most applications, about two tablespoons are enough for each section. If you apply too much, it could seep through the seams and ruin your work.

There are several reasons why applying adhesive in one area at a time would be beneficial:

  • You can choose where exactly you want grass
  • It helps ensure even coverage (or lack thereof)

Apply Adhesive to One Section at a Time Table

Work in sections when applying adhesive to the wall.
Use a trowel or another appropriate tool to apply the adhesive, starting at the bottom of the section.
Spread the adhesive evenly across the section, taking care not to leave any gaps or clumps.
Work from the bottom up, applying adhesive to the next section when the previous one is complete.

Push Flat Using A Back-And-Forth Motion

To ensure that the artificial grass is flat and smooth, use a roller to press it down. Start at one end of your wall and roll back and forth in short circular motions. 

This will help flatten out any bumps or creases that may have been created during installation. Make sure you push the grass flat into itself so there are no gaps between pieces of turf. 

Once this step is complete, let your new yard grow for several days before applying any trim like edging or trimmings around the edges of your patio or decking area.

Installing artificial grass can be a tricky process, but with the right guidance, it doesn’t have to be. Take a look at our expert tips on installation of artificial grass landscape advice for a step-by-step guide that explains the process in easy-to-follow terms.

Trim The Grass

The next step is trimming the edges of your artificial grass. You can do this by hand, but it’s much easier and more efficient to use a pair of scissors. 

As long as you are careful not to cut into the wall or any other surrounding surfaces, it should be relatively simple to get a clean finish using scissors.

Trimming with a pair of scissors is much quicker than trying to cut by hand, so make sure you don’t rush through this important step!

Use Corners On The Top And Bottom Of Your Grass.

Corners are not needed for wall applications, but if you want to use them, go for it. Corners help to hide the seam between strips of grass and should be glued down first before adding any more grass.

As mentioned above, corners can be used in any application where artificial grass is being used on an edging material such as plastic sheeting or wood boards. 

In addition to looking good around the edges, they also provide a very practical benefit – keeping the turf in place when it’s windy outside!

If you’re looking to attach artificial grass to a wall, it can seem like a daunting task. However, with the right knowledge and tools, it can be done with relative ease. Our helpful guide on simple tips to attach artificial grass to a wall offers guidance that will make the process more manageable.

Once You Have Two Sides, Add Your Third Side.

Now that you have two sides of your artificial grass, it’s time to add your third side. The key here is to make sure that all three sides are straight and even. 

If you are using a corner, make sure the corners are perfectly aligned so that when they meet in the middle they form a perfect rectangle. If you’re using a straight strip, make sure it’s perfectly straight on both ends and not crooked like mine!

Keep Adding Strips Until You’ve Filled All Four Edges.

You should keep adding strips until you’ve filled all four edges. Add glue to each strip, making sure it’s even and straight on both sides. 

If you have wall edging that matches your new lawn, use this to help line up the pieces so they’ll be even with one another. 

You can also use a level or tape measurer to make sure your new grass is straight up and down on the wall.

Once all of your grass has been cut, which may take several hours or days depending on how big of an area you’re covering with artificial turf, it’s time to apply it!

When installing artificial grass in a garden or yard, it’s important to ensure that it stays in place. One way to do this is to anchor the grass to the soil beneath it. Learn more about how to do this effectively with our guide on how to attach artificial grass to soil, which gives some easy-to-follow tips for securing your grass in place.

Apply Glue To The Last Strip Of Grass

Now it’s time to apply glue to the last strip of grass. Apply glue to both sides of the grass, making sure it is 1/8″ wide and 1/4″ thick. Make sure the glue is spread evenly, as too much will drip down your wall.

Make Sure It Is Straight Before The Adhesive Dries Up

Now that you have cut your grass to fit the desired area, it is time to apply adhesive. To do this, make sure that you have enough glue on your hands and spread it evenly on the backside of the artificial grass (the side with no backing). 

After spreading the glue, place it on top of where you want it to go and press down firmly so that all of the pieces stick together well. You may need someone else’s help with this step if your wall is very large or heavy-duty adhesive is required for any reason. 

Make sure that none of the adhesives gets onto other parts of your wall such as paint or wallpaper because it can cause damage or discoloration over time!

When applying artificial turf on walls there are several things to keep in mind:

Make sure that when working with adhesives you follow instructions carefully; always wear protective clothing like goggles when handling chemicals like these ones because they may cause irritation if they come into contact with eyes unprotected while wearing regular eyeglasses instead!


If you have any questions about this process, feel free to leave us a comment below! We’re happy to help and we hope you found these instructions helpful.

Further Reading

If you’re interested in learning more about installing artificial grass on walls, check out these helpful resources:

Garden Tabs offers a guide on how to install an artificial grass wall and provides step-by-step instructions.

E Home Mart discusses whether or not it’s possible to put artificial grass on a wall and describes the process in detail.

Pearlivia offers a guide on how to install an artificial grass wall, which includes some tips for selecting the right materials and tools.


How do I install artificial grass on a wall?

To install artificial grass on a wall, you’ll need to select the right materials and follow a few key steps. First, you’ll need to measure the size of the wall to determine how much grass you’ll need. Then, you’ll need to create a frame to hold the grass in place, which can be made from wood or other materials. Once the frame is in place, you can attach the grass using adhesive or another method.

Can I put artificial grass on any type of wall?

While it’s possible to install artificial grass on many types of walls, some surfaces may be more challenging than others. For example, a rough or uneven surface may require extra preparation before the grass can be attached. It’s also important to ensure that the grass is compatible with the type of wall you’re attaching it to, as some materials may not work well together.

How do I maintain an artificial grass wall?

To keep your artificial grass wall looking great, it’s important to clean it regularly and be mindful of any signs of wear and tear. You may also need to trim the grass periodically to keep it looking neat and tidy. With proper care, an artificial grass wall can last for many years.

Can I install an artificial grass wall myself?

While it’s certainly possible to install an artificial grass wall yourself, it can be a challenging project that requires some expertise. If you’re not comfortable doing the work on your own, consider hiring a professional to help.

How do I choose the right type of artificial grass for a wall?

When selecting artificial grass for a wall, you’ll want to consider factors like color, texture, and durability. Look for grass that is designed for outdoor use, as it will be able to withstand the elements better than indoor grass. It’s also a good idea to choose a reputable brand that is known for producing high-quality artificial grass.