How To Attach Artificial Grass To Soil (Find OUT)

The best way to attach artificial grass to soil is by using a turf adhesive. This is the most effective method when installing artificial grass on a lawn or garden bed. 

However, if you have very sandy soil or are looking for an alternative option then you may want to consider other methods of attaching your synthetic lawn instead.

In this guide we will explain what products are used for each method and also discuss why they work so well. 

After reading this article you’ll be able to make an informed decision as to what method is best suited for your project before starting work on your new synthetic lawn!

DIY – How to Install Artificial Grass on Dirt

Sure, here’s a single column takeaway table based on the TITLE:

Artificial grass can be installed on a variety of surfaces, including concrete, decking, soil, and indoor surfaces like concrete or wood flooring.
Proper surface preparation, including clearing the area of debris or vegetation, leveling the surface, and creating a firm base, is essential for successful installation of artificial grass.
Artificial grass requires very little maintenance compared to natural grass, and it can last for many years if properly installed and cared for.
Installing artificial grass yourself is possible, but it is recommended to hire a professional installer for the best results.
Infilling provides excellent stability and makes artificial grass look and feel more natural. The different types of infill and infilling techniques available can be learned through various online resources.

Garden tacks or garden staples

  • To attach artificial grass to soil and prevent it from shifting, use garden tacks or garden staples.
  • To drive the tacks into the ground use a hammer. Make sure you use a soft hammer so as not to damage your turf. You can buy garden tacks in different sizes and lengths, as well as in different colours.

If you want your artificial grass to look and feel more natural, you should consider adding sand infill to it. Our guide on how to add sand to artificial grass provides easy tips on how to do this.

Liquid weed killer

It’s important to use a weed killer that will not harm the grass. For example, glyphosate is a popular herbicide that targets broad-leafed plants like dandelions and clover. 

It causes these weeds to wither and die within 24 hours of contact with the soil. Glyphosate is also safe for your lawn and it won’t interfere with the growth of your artificial grass either!

To apply glyphosate, simply spray it directly onto the ground in an area where you want to kill any unwanted weeds. 

Make sure you cover all parts of the weed so none are missed when spraying them with this chemical treatment (otherwise those rogue weeds might spring up again). 

You can also use a brush applicator or other tool if necessary; just make sure it doesn’t scratch up your existing grass blades!

Table: Types of Liquid Weed Killers Safe for Grass

Liquid Weed KillerTargeted PlantsBenefits
GlyphosateBroad-leafed plants like dandelions and cloverKills many types of weeds, easy to apply, low residual effect
DicambaDicots, Broad-leafed plantsEffective against hard-to-kill weeds, good for warm-season grasses, fast-acting
2,4-DBroad-leafed weedsSelective, low toxicity to mammals, easy to apply
TriclopyrWoody plants, vinesSafe for most grass types, good for wooded areas, selective control over many weeds
SulfentrazoneBroad-spectrum weed controlWorks well in warm weather, provides residual control, easy to apply

This table summarizes some of the common types of liquid weed killers that are safe for grass, along with their targeted plants and benefits. Before using any weed killer product, follow the instructions and precautions on the label to ensure safe and effective use.

Turf adhesive (Bonding glue)

So, how do you attach artificial grass to soil? Well, it’s not as simple as just sticking the artificial grass down. You need to apply glue and then leave the glue for 24 hours before laying down your turf.

Turf adhesive can be purchased from any garden centre or hardware store and comes in a few different forms including liquid or powder. 

The latter is much easier to apply because it can be mixed with water in equal parts (1:1) and allowed to dry on its own before laying down your turf. 

If using liquid turf adhesive though, make sure that you have enough time between preparing it and applying it because once mixed together they need at least 24 hours before use!

Infilling provides excellent stability and natural grass look, so make sure you know how to do it properly. Check out our guide on how to add infill to artificial grass to learn about different types of infill and infilling techniques available.

Artificial Grass Joining Tape

If you want to keep your artificial grass in the best condition possible, then you should consider using artificial grass joining tape. 

This is a kind of adhesive that is designed specifically for attaching synthetic grass to soil. It’s also known as turf taping or turf tape.

What’s great about this type of product is that it will keep your fake grass firmly attached to the ground while providing a smooth surface that looks natural and realistic. 

The easiest way to install this material is simply by laying it down before laying out any artificial turf, but it can also be used after the fact if you need repairs or replacements done at some point down the line.

Table: Top Artificial Grass Joining Tapes for Seamless Lawn

Joining TapeLengthWidthMaterial
QYH Self-Adhesive Artificial Grass Joining Tape32.8 ft6 inNon-Woven Fabric
LITA Artificial Grass Tape33 ft6 inWoven Polypropylene
Goasis Lawn Artificial Grass Tape50 ft6 inNon-Woven Fabric
Grass Artificial Grass Seaming Tape65 ft6 inNon-Woven Fabric
Diketem Artificial Grass Seaming Tape32.8 ft6 inNon-Woven Fabric

This table shows the top artificial grass joining tapes available in the market, along with their length, width, and material. Using artificial grass joining tape is an effective way of keeping your synthetic lawn in perfect condition by ensuring a seamless transition between different sections of your lawn. Before choosing any joining tape, make sure that it is compatible with the artificial grass you have installed.

Artificial grass joining pins (Joining pegs)

Artificial grass joining pins are used to join artificial grass to the soil. They are made of steel and come in different sizes and colors. These joining pegs can be used for synthetic turf as well as natural grass.

Joining pins (also called joining pegs or spikes) help you to attach your artificial lawn to the ground, so that it doesn’t move around during windy weather or heavy storms. These spikes can be purchased online or at most hardware stores near you.

Attaching artificial grass to concrete is an easy and cost-effective way to transform a dull concrete surface into a beautiful and lush green lawn. Learn how to install artificial grass on concrete by reading our guide on how to attach artificial grass to concrete.

Membrane liner

A membrane liner is a waterproof material that is used to prevent water from seeping through the grass. It also helps in protecting the grass from ultraviolet rays, which can cause discoloration and fading. 

The membrane itself comes in rolls and can be cut into pieces depending on the size of the area where you want to install artificial turf.

Membrane liners are great for making sure that your grass remains clean and free from debris like leaves, twigs, etc., so you don’t have to worry about sweeping as much!

Landscape fabric

Landscape fabric is an inexpensive way to create a barrier between your lawn and existing soil. It will keep weeds from sprouting up and make it easier for you to keep your artificial grass looking great by preventing washout or other issues caused by rain runoff.

Landscape fabric can also be used as part of a system that uses an infill material such as sand or gravel to hold down the artificial turf fibers, creating a more stable base for your new lawn. 

This method is less expensive than laying down plastic sheets over top of the existing soil, but still allows for ample drainage through the porous fabric cover.

Decks can be a challenging surface to install artificial grass, but it is a task that can be done with ease by following a few simple steps. Our guide on how to attach artificial grass to decking provides you with all the essential tips and tricks to make this job easier.

Decking Screws

Once you’ve removed the grass from its packaging, you’re ready to install it. You’ll need a drill and some decking screws.

First, use your drill to drill into the soil about 1 inch deep in the area where you want to install the artificial grass you should hear a hollow sound when it hits dirt below. 

Then take one of your pieces of artificial grass (with its backing still on) and slide it into position with one end pointing towards the direction from which water will flow down onto it (we recommend pointing them towards where they’ll be watered). 

Next use a screwdriver to tighten each screw carefully until they’re all in place; repeat this process for every piece of fake grass that needs installing

Self-adhesive mesh tape

Self-adhesive mesh tape is a popular choice for attaching artificial grass to soil. It’s a strong and durable material with a long shelf life, making it easy to use in many applications.

Mesh tape can be cut with scissors or a sharp utility knife, depending on the type of mesh you choose. Grid-style matting needs to be cut into smaller squares or strips, while solid strips work well for creating borders around your lawn area.

Self-adhesive mesh has many advantages over other types of artificial grass attachments, such as staples or nails:

Building a frame around your artificial grass area can add more aesthetic value to your lawn while also protecting it from damage. Read our guide on how to attach artificial grass to the frame to learn more about this process and how to do it efficiently.

Artificial Grass Trimming Tools

A trimmer is a must-have tool for any gardener. It can be used to trim the leaves of plants and bushes, as well as to cut away any excess grass from your artificial lawn.

A scissor is great for cutting fabric, paper and other soft materials like grass. If you’re using artificial grass that has been attached to soil then this is definitely the best tool for you!

A knife can be used in several different ways depending on what kind of job you’re doing at any given time. 

For example: when planting flowers or seeds it may be best suited towards digging holes before placing them inside; whereas if we’re talking about removing weeds then maybe something longer such as a spade or shovel would be better suited instead (just make sure not too deep). 

You should always take into consideration what depth your garden needs before buying anything new so it doesn’t become too difficult later on down the line.

Using a garden trowel will allow us to dig out small areas while remaining safe from injury because they don’t have any sharp edges like knives do – meaning no need worry about cutting yourself on accident! 

They’re also easy enough for kids too which means everyone gets involved whether young or old so why not get started today?


You can use the tips above to help you attach artificial grass to soil and make your garden look great. 

The most important thing to remember is that any project like this can be intimidating at first, but if you take it slow and do it step by step, you will soon see how easy it really is. 

You will also discover that installing artificial grass isn’t just about looks it’s about giving your garden a new lease on life!

Further Reading

Here are some additional resources you may find useful for learning about installing artificial grass:

How to Lay Artificial Grass: A comprehensive guide on how to lay artificial grass with step-by-step instructions, photos and video tutorials.

How to Lay Artificial Grass on Soil: An installation guide on how to install artificial grass on soil with detailed illustrations and easy to understand instructions.

Can I Lay Artificial Grass on Soil?: A brief article that explores some of the common questions about installing artificial grass on soil with helpful tips and advice.


What is the best surface to install artificial grass on?

Artificial grass can be installed on a variety of surfaces, including concrete, decking, soil, or even indoor surfaces like concrete or wood flooring. One of the most important things to keep in mind is to make sure the surface is clean, smooth and firm.

Can I install artificial grass on soil?

Yes, you can install artificial grass on soil, however, it is important to prepare the area properly before installation. The soil should be compacted and level, and it may also require a layer of crushed rock or sand depending on the drainage requirements.

How do I prepare the surface before installing artificial grass?

It is important to clear the area of any debris or vegetation, level the surface, and create a firm base by using a layer of crushed rock or sand.

Can I install artificial grass myself or should I hire a professional?

While it is possible to install artificial grass yourself, it is recommended that you hire a professional for the best results. Professional installers have the knowledge and experience to properly prepare the area and install the artificial grass.

How do I maintain artificial grass?

Maintenance of artificial grass is generally simple and easy. You should regularly sweep the grass to keep it clean and upright, and remove any debris or leaves that may have fallen on it. It is also advisable to rinse it down periodically to remove accumulated dust and dirt.