How To Build A Frame For Artificial Grass (Find OUT)

Ready to install artificial grass in your yard? If you’ve never installed artificial turf, you may be a little intimidated by the prospect. 

But don’t worry—it’s not as hard as it looks! With the help of this guide, you’ll be well on your way to installing the perfect garden or tennis court for years of use.

How to lay artificial grass

Sure, here’s a single column takeaway table based on the titles:

What’s the best artificial grass to use for my lawn?
How long does artificial grass usually last?
Can I install artificial grass on any surface?
How can I clean my artificial grass?
Can dogs and pets use artificial grass?

Choose The Size Of The Area To Be Framed

Before you start building your frame, it’s important to choose the size of the area to be framed. A good rule of thumb is for it to be about 10% larger than your artificial grass rolls. 

This will ensure that there isn’t any overlap in between rolls and that the pieces don’t hang over the edges.

If you’re not sure how large an area needs to be framed, measure out your space with a tape measure and then add another inch on both sides. 

This should give you plenty of space around your lawn to work at without worrying about accidentally getting clipped by scissors or bumping into anything while installing your new grass!

Adding sand to your artificial grass can help in maintaining the shape and stability of your lawn. To know the process of adding sand to your synthetic turf, check out our guide on adding sand to artificial grass and improve the durability and longevity of your lawn.

Clear And Level The Area

The first thing you’ll need to do is clear and level the area. You can use a sod cutter, shovel, or even just a large spade to take care of this task. Once you’ve cleared the area, you’ll want to level out your site with a spirit level. 

If there are any low spots or high points in the ground that can’t be leveled by hand, then you should use some sort of heavy equipment like a tractor with weights on its wheels or even a backhoe if necessary!

Once your site is completely clear and flat (or at least as close as possible), it’s time to remove all debris from the ground so that it will be easier for artificial grass installation later on down the road. 

For example: If there are rocks sticking up through where I want my artificial grass lawn then those rocks will definitely get noticed once installed so I need them removed before anything else happens!

Here’s a table based on the semantic of the point “Clear And Level The Area” with the title included in H3 format:

Clearing and Leveling The Area

Sod CutterA tool used to remove a layer of grass and roots from the soil.
ShovelA hand tool used for digging and moving soil.
Large SpadeA long-handled tool used for digging and removing dirt.
Spirit LevelA tool used for determining the horizontal level of ground by measuring the difference in height of two points.

Create A Boundary With Concrete Edging

Once you’ve laid down the base and attached your lawn to it, it’s time to start on your boundary.

Concrete edging is a great way to create a boundary around an artificial grass area. Concrete edging can be made from concrete, brick or stone and provides a clean and attractive finish. 

You can purchase pre-formed concrete edging from many stores or DIY centres that sell building materials, such as Homebase or Wickes. 

Alternatively, if you have access to basic tools such as drills and saws then you could make your own concrete edging by mixing up cement with stones or bricks (depending on which type of material you’re using).

To install pre-made concrete edging simply dig out the area where it will go using spades or shovels until there’s enough room around each side of your lawn for the size of the pieces needed (the depth should be approximately twice that required). 

Then place these in place along with any screws required prior to filling in any gaps between them with more soil so they’re properly held in position without falling over easily during use later on down the line when people start walking over them regularly with shoes on.”

Artificial grass infill plays a crucial role in maintaining the appearance and health of your lawn. To know about the different types of infill and how to add them, check out our guide on adding infill to artificial grass for a well-maintained lawn.

Install The Edging Material To Support The Frame

Now that you’ve finished installing the artificial grass into your frame, it’s time to install edging material around the perimeter of your frame.

Edging is a flexible plastic product that comes in rolls and can be found at most hardware stores. You’ll need to have this on hand before starting construction so you can cut it down to size with scissors or a utility knife.

Use a hammer to pound in the edging material into the ground along both sides of your outer frame pieces (the 4-foot and 8-foot pieces). 

The idea here is for this piece of plastic to help hold up and support both frames so they’re flush with each other at all times.

Once both edges are secured into place with stakes, use a shovel or spade shovel to level out any high spots in between them until everything is nice and flat again–this will make sure there aren’t any loose ends flapping around while you work on other parts later down below!

 Make sure everything looks good before moving forward though because once those stakes are pounded down into place, they tend not come back out easily without some serious effort involved first! If need be though then just keep trying until it does eventually loosen up enough for removal purposes.”

Here’s a table based on the semantic of the point “Install The Edging Material To Support The Frame”:

Edging Material for Artificial Grass Installation

Bender BoardA thin and flexible type of edging material made of recycled plastic. It is typically used for creating curves and shapes.
BrickA traditional edging material that provides a classic look to your lawn. It requires professional installation and maintenance.
ConcreteA sturdy and long-lasting edging material typically used for commercial or heavy-duty applications. Requires professional installation.
PaversA decorative and easy-to-install edging material that comes in various shapes, sizes, and colors.
TimberA natural and affordable edging material that is easy to install and maintain. It can also be painted or stained to match the color of your home’s exterior.

Note: It’s important to select an appropriate and durable edging material based on your lawn’s location, usage, and weather conditions.

Prepare Impact Absorbing Infill Material

Now that you have the frame of your artificial grass laid out, it’s time to add the infill material! Using a hammermill, crush some recycled rubber tires until they resemble fine particles. 

Then, using a rotary cutter or similar tool, cut those pieces into smaller pieces no larger than 1/2″ (1 cm). Put these pieces through a sieve so that only very small bits remain and none of the larger pieces make their way into your final product.

Finally, use some sort of compactor whether on wheels or not to compact all of these materials together very tightly in an effort to keep them from moving too much when you walk on it later. 

If you don’t have access to one of these machines yourself (which is unlikely), consider renting one from a local hardware store for this purpose if possible! 

After compaction is complete, wet down your new infill material thoroughly with water for at least 24 hours before installing it into its final location so as not dry out too quickly while waiting installation timeframes after install day arrives!

Installing artificial grass can be a daunting task, but it can be made easier by following the right process. Take a look at our step-by-step guide on installing artificial grass and have a beautiful and long-lasting lawn.

Install Impact Infill Material Between Turf And Ground

The impact infill material is used to protect the artificial grass. The most common materials are wood, rubber or plastic, which provide different qualities of protection. 

It is recommended that you use at least 3/8 inch thick of impact infill material and 1/2 inch thickness if you want better protection for your artificial sports field.

The quality of protection depends on how many times the ball has hit an object before hitting the turf surface.

Build A Border Using Composite Lumber

Nailer boards are strong and durable. They’re used to hold artificial grass in place, so it doesn’t move or shift. You can get nailer boards online at most home improvement stores.

Nailer boards look like long pieces of wood with nails sticking out of them at regular intervals along their length (usually every 6 inches). 

To use them as a border for your frame, you’ll need to figure out how wide you want your border to be. 

Then, hammer three nails in each end of the board; this will form two 90-degree corners where they meet one another when propped up against the wall or fence on either side of the area where you want to put down artificial grass later on. 

Assemble these two sides together using these corners until they form an enclosed rectangle and seal all four sides by hammering nails into each corner which creates a seal between neighboring panels – this will prevent moisture from getting inside during rainy weather!

Proper maintenance is the key to having a beautiful and long-lasting artificial lawn. Check out our guide on maintaining your artificial lawn in the UK to have a well-maintained and lush lawn all year round.

Create Drainage In Your Artificial Grass Installation

You can choose to create drainage in your artificial grass installation in a number of ways. These include:

Drain mat – a small mat designed to sit under the artificial grass and allow water from rain or sprinklers to drain away.

Drain hose – an open tube that allows water from rain or sprinklers to drain away by connecting it from the base of your installation, through the lawn and out into the ground below.

Drain pipe – this is similar in appearance to a drain hose but with extra length for better drainage. You can also use PVC piping if you prefer not having visible pipes above ground level.

Drain trench – this involves digging out a channel through which water will flow freely into an existing underground pipe or well. 

It’s best installed by professionals who know how deep they need it cut (depending on where you are) and how wide it needs cutting so that there won’t be any blockages later on when trying place your artificial grass over top! 

This method is ideal for people living near rivers/lakes etcetera since these types of locations tend not have good drainage anyway; hence why we recommend using this method whenever possible! 

If however you’d rather not spend money on hiring professionals then perhaps consider using other methods such as those mentioned previously instead (e.g., “drain tiles”).

Install Artificial Grass Rolls Over Infill

Once the rolls are laid out, use seaming tape to hold them together. The seaming tape used in commercial installations is a thin, flexible plastic strip that’s applied across the seam between two rolls of artificial grass. 

It can be removed after installation and is sometimes used in place of glue (which should never be used with artificial turf).

Seam-taping helps keep the rolls aligned while they’re being installed and ensures that they’ll remain in place once they’re secured on the ground.

Installing artificial turf is an investment that can provide a long-lasting solution for your lawn. Learn about the installation process of artificial turf by checking out our guide on installing artificial turf in your yard and enjoy a beautiful lawn for years to come.

Roll Out Your Turf Onto The Seaming Tape

This is the part where you actually put down turf. You’ll want to start with your seaming tape, which should be rolled out so that it covers an area equal to the size of your frame. Make sure you overlap all three sides of your seaming tape by about 6 inches (15 centimeters). 

Next, unroll your artificial grass on top of your seaming tape and smooth out any wrinkles or bumps with a carpet roller. 

If you don’t have access to a carpet roller, use another piece of material as long as it’s big enough to cover both pieces at once like an old sheet or blanket will do just fine!

Once everything has been laid out according to plan, make sure there are no gaps between pieces in order for them all fit together seamlessly once stapled down later on during installation process which brings us neatly onto next step:

Remove The Seaming Tape

To remove the seaming tape, use a utility knife to cut along each side of the seam. Then peel off the strip of tape being careful to keep it in one piece.

Do not remove any other pieces of artificial grass! The border and edging should be left on as they help keep your lawn looking neat and tidy. 

Also, don’t remove any infill yet as this gives you an idea of how deep your grass has been laid down and ensures that you have enough infill for future maintenance and repairs.

Install A Nailer Board

To secure the artificial turf, you’ll need some nailer boards. These are made from wood and will be nailed to the frame of your backyard. 

Some homeowners opt for wooden nailer boards that are specifically made for this purpose, but others choose to use regular 2x4s or even planks of plywood. 

While it’s possible (and sometimes preferable) to go with a lighter option here if you’re looking for something that won’t weigh down your frame too much, remember that a heavy-duty construction is necessary if it’s going to hold up over time and weather conditions.

Once installed, these boards should be secured into place with nails every two feet or so on both sides of them so they can withstand stress from wind or other movement around them—especially important if you’re going with a pathway instead of just laying down grass directly beneath them! 


There are many ways to build a frame for artificial grass. The most common way is to use wood, but you can also use metal or concrete blocks. 

Regardless of what material you choose, it’s important that all materials used in the construction process be strong enough to support the weight of dirt and plants on top of them without sinking into the ground beneath them.

Here’s your requested text using markdown language:

Further Reading

Here are some other resources related to installing and maintaining artificial grass:

Perfect Grass Ltd: How To Install The Groundworks For An Artificial Grass Lawn – A comprehensive guide on how to prepare the groundwork for your artificial lawn installation.

BuzzGrass: How To Install Artificial Grass – A detailed guide on artificial grass installation covering the main installation phases.

Perfect Green Grass: Artificial Grass Installation Guide – A step-by-step guide that covers all aspects of installing and maintaining artificial grass.


What’s the best artificial grass to use for my lawn?

The best artificial grass can depend on various factors like your budget, the level of traffic on your lawn, and your preferred look. Generally, choose a grass with good drainage, heavy-duty backing, and UV resistance features.

How long does artificial grass usually last?

Typically, artificial grass can last around 8 to 12 years, but its life expectancy can be shorter or longer depending on the quality of the grass and how well you maintain it.

Can I install artificial grass on any surface?

Yes, it’s possible to install artificial grass on many different surfaces, including soil, decking, and concrete. However, preparing the surface correctly is essential for a long-lasting installation.

How can I clean my artificial grass?

You can easily clean your artificial grass by brushing it or hosing it down with water. For tougher stains, use a mild detergent or artificial grass cleaner, and rinse it thoroughly.

Can dogs and pets use artificial grass?

Yes, artificial grass is a great option for pet owners. Choose a high-quality grass with good drainage to prevent odor, and keep it clean by regularly picking up any pet waste.