How To Apply Zeolite To Artificial Grass

Zeolite is a ground up mineral that acts like a sponge, absorbing toxins in the soil and releasing them when it’s time to replace your artificial grass. 

Zeolite helps keep your lawn looking its best by keeping it healthy without having to spend money on fertilizers or pesticides.

How to Install Artificial Turf – Infill

Sure! Here is the takeaway table based on the TITLE, without dashes at the beginning of each row:

Zeolite is a natural mineral that is commonly used as an infill for artificial grass.
Zeolite can help to control odors and absorb moisture, making it an effective solution for improving the quality and durability of artificial turf.
Applying zeolite infill is a relatively simple process that can be completed with just a few basic tools and materials.
In addition to improving the performance of your artificial turf, using zeolite as an infill can also offer several environmental benefits.
By using zeolite infill for your artificial grass, you can enjoy a more natural, durable, and comfortable lawn that will last for years to come.

Mix Zeolite Into The Sand

To apply zeolite to your artificial grass, simply mix it into the sand. Zeolite is a natural mineral that improves drainage and reduces odours in artificial grass. It is also safe for children and pets.

Adding sand to artificial grass is an important step in the installation process, but it can be tricky to get it just right. Check out our guide on how to add sand to artificial grass for helpful tips and tricks to ensure your artificial grass looks and feels natural.

Apply The Sand

Sand is a must for any synthetic grass installation. It helps the turf stay in place and prevents the blades from getting wet. 

The sand should be between 3-6″ deep and spread evenly throughout the Zeolite. If you don’t have enough sand, you can add more later on after the turf has been laid down.

Spread the sand out evenly with a trowel or rake to avoid creating ruts in your lawn. Don’t push it into place just make sure that there are no large piles of sand where they shouldn’t be! Remember, we’re trying to create a flat lawn here!

Takeaways for Applying Sand to Synthetic Grass

Benefits of Applying Sand to Synthetic GrassTips for Applying Sand to Synthetic Grass
Prevents turf from slipping or moving aroundUse a lawn roller to help distribute the sand more evenly
Helps the turf maintain its shape and structureApply the sand in layers, rather than all at once
Increases the lifespan of your synthetic grassUse a drop or broadcast spreader to apply the sand
Prevents blades from becoming matted or crushedMake sure the sand is dry before applying it to the turf
Reduces the impact of foot traffic on the turfUse a sand with a particle size of 0.5mm – 2.0mm for best results

This table outlines the benefits of applying sand to synthetic grass as well as several tips for applying sand effectively. By following these tips and taking advantage of the benefits of sand, you can ensure that your synthetic grass has the support it needs to remain stable, durable, and attractive over time.

Block Off The Area

You’ll need to block off the area where you will be applying zeolite. Use a tape measure or straight edge to measure out a rectangle that is 3″ larger than your artificial grass. 

This is so that you don’t accidentally get any liquid on the edges and ruin your lawn.

Use a level to make sure that it’s perfectly flat, then use a shovel to dig up the sod as deep as possible (if you’re not replacing it) or move over some dirt from another area.

Properly infilling artificial grass can help ensure that it stays in place and lasts longer. Learn how to correctly add infill to your artificial grass with our easy to follow guide.

Add Water

To apply the first coat of Zeolite to your artificial grass, simply add water to the sand and mix until it is moist. Do not over water or soak it; this will cause clay to stick too heavily to your grass and make it difficult for you to spread evenly.

Afterwards, grab a handful of Zeolite powder and slowly sprinkle them onto your lawn, working from top down in rows. 

Make sure that every single spot has at least one layer of zeolite on it before moving on. After coating all areas with zeolite, move onto step three:

Takeaways for Adding Water to Zeolite and Sand Mixture

Benefits of Adding Water to Zeolite and SandTips for Adding Water to Zeolite and Sand
Creates a moist mixture that is easy to spread evenlyUse a hose or sprinkler to apply water gradually, rather than all at once
Helps to ensure that the zeolite and sand mixture adheres to the artificial grass backingMix the zeolite and sand together before adding water to ensure an even distribution
Prevents the mixture from becoming too dry and clumpyUse a tarp or plastic sheet to cover the zeolite and sand mixture if you need to take a break
Helps the mixture settle into place on the artificial grass surfaceAvoid over-saturating the mixture with water, as this can cause clay to stick to the turf and make the mixture difficult to spread
Can help to prolong the lifespan of your artificial grassUse a spray nozzle on your hose to direct the water where it’s needed most

This table outlines the benefits of adding water to the zeolite and sand mixture when applying it to artificial grass, as well as several tips for doing so effectively. By following these tips and taking advantage of the benefits of water, you can help to ensure that your artificial grass remains stable, durable, and attractive over time.

Sweep The Sand

The next step is to sweep the sand back into the bag. This will help avoid leaving behind a trail of sand when you are done sweeping. If you do not have a leaf blower, you can use a broom for this step as well.

Are you struggling with attaching your artificial grass to concrete? Our expert tips on how to attach artificial grass to concrete can help you through the process.

Topdress With More Sand

After you’ve applied the zeolite to your artificial grass, you may notice some gaps in the coverage. 

You can add more sand to fill in these gaps by topdressing it on with a broom. Use just enough sand to fill in any gaps too much will weigh down your turf and make it look flat, while too little won’t fill in all the spaces!

Install Your Artificial Grass

Once you’ve installed the artificial grass, it’s time to get down to business! Be sure to install your new lawn in the morning and remove any debris from the area where you intend to install. 

We recommend laying down a tarp before beginning installation, as this will help protect your lawn from spills and other problems.

It’s also important that you don’t install artificial grass on concrete or shaded areas. Concrete is too hot for most artificial grasses to maintain their quality, while natural fibers tend not to react well when exposed to direct sunlight over time.

Anchoring your artificial grass is crucial for ensuring that it stays in place over time. Check out our guide on how to anchor artificial grass to learn about several effective and easy ways to anchor your artificial grass.

Cut It To Fit Your Yard’s Layout

You will need a sharp knife and scissors to cut the artificial grass.

  • Cut all of the edges of your yard, so that it fits perfectly in its layout.
  • Do not cut too close to the edge of the plastic sheeting, or else it might peel off when you are laying down your artificial lawn over top of it. Leave some space between where your turf meets up with plastic sheeting (about 3-5 inches).

Lay Out Artificial Grass On Top Of The New Base In Your Yard

Now that you’ve got your base installed, it’s time to lay out the artificial grass. Make sure to cut it to fit around any trees, posts or other obstacles in your yard. After securing the perimeter, clean up any loose pieces and get ready for some fun!

If you’re installing artificial grass on wood, you’ll need to follow some specific steps to ensure that it stays in place and lasts for a long time. Read our guide on how to attach artificial grass to wood for expert tips and advice on this process.

Trim Seams And Outsides

Trimming your artificial grass is a very simple process, but it requires you to use a sharp blade, as anything else may damage the fibers in the turf.

Scissors are an effective tool for cutting the edges of your fake lawn. You should be careful when using scissors on artificial grass, because they are sharp and can cause injury if used improperly. 

When trimming with scissors, make sure that you cut only on top of existing strands so that they can be easily re-attached after trimming. If you want a more precise edge or sharper line than scissors provide, you may want to consider using a weed trimmer instead.

Secure The Perimeter Of Your Artificial Grass

Once you’ve applied your zeolite, you’ll want to finish the job by securing the perimeter of your artificial grass. Many people use zip ties to do this, but there’s also a spike system that can be used instead.

Clean Your New Lawn!

Use a hose to clean off any dust or dirt, then use a broom to sweep away any loose sand. If you’re installing zeolite on top of artificial grass, it’s important that you remove as much loose sand as possible so the zeolite doesn’t get buried by it. 

You may also want to use a leaf blower on your lawn after sweeping up any remaining loose sand particles; this will help prevent them from being blown around during installation by the wind or rainwater runoff. 

Finally, vacuum up any remaining particles with a soft brush attachment for hardwood floors (or whatever kind of brush attachment you have for your vacuum).

Zeolite Is Easy To Apply, But Follow These Steps For Best Results

Make sure the artificial grass is thoroughly dry before applying zeolite. This isn’t always possible in rainy or humid climates, so if you’re not sure how long it’s been since the grass was last mowed, cover it with a tarp and wait until it’s dry enough to walk on.

Sprinkle some zeolite powder over the entire surface of your artificial grass lawn just like you would salt onto an icy sidewalk; this will help prevent weeds from growing through cracks in the fake blades of grass instead of roots growing through them like they would on natural grasses.

Walk away from where you applied zeolite and let nature take its course! Once rain has washed away most traces left behind by human feet (or paws), take another look at your lawn you’ll probably notice some white spots where seeds were unable to grow due to their lack of light exposure after being covered up by zeolite powder.


It’s time for you to step up your game and install some new artificial grass. Artificial grass is great for so many reasons. 

It looks nice, it saves water, it doesn’t require much maintenance and it can last for years without fading or wearing out. 

Further Reading

Here are some additional resources on zeolite and artificial grass that may be helpful:

Zeolite for Artificial Grass: Questions Answered: This FAQ-style post covers everything you need to know about zeolite, including what it is, how it works, and why it’s beneficial for artificial grass.

How to Apply ZeoFill to Your Artificial Grass Lawn to Keep It Smelling Great: Learn how to apply zeolite-based infill to your artificial grass lawn with this helpful guide from Perfect Grass.

Uses for Zeolite: Turf Infill: IDA-ORE provides a comprehensive overview of how zeolite can be used as an infill for artificial grass, including its benefits and how it works.


What is zeolite?

Zeolite is a naturally occurring mineral that is commonly used in various applications, including as an infill for artificial grass. It is known for its ability to absorb odors and moisture, making it a popular choice in many different industries.

What are the benefits of using zeolite for artificial grass?

There are several potential benefits to using zeolite as an infill for your artificial grass. These benefits can include improved odor control, reduced moisture buildup, and increased durability.

How do I apply zeolite to my artificial grass?

The exact process for applying zeolite to your artificial grass will differ depending on the specific product you’re using. Most zeolite infill products will come with detailed instructions on how to apply them, so be sure to follow the manufacturer’s recommendations closely.

Is zeolite safe for pets and children?

Zeolite is generally considered to be safe for pets and children. However, as with any product, it’s important to follow all safety guidelines and keep the zeolite out of reach of children and animals.

How long does zeolite last in artificial grass?

The lifespan of zeolite in artificial grass will depend on a variety of factors, such as the amount of foot traffic the grass receives and how well it is cared for. However, in general, zeolite infill can last for several years if properly maintained.